Toa D-901 KR - Manual (Page 28)

28
(4) Level attack button [Level Attack (ms)]
Displays the level sensing attack time for each channel by means of numerical values. Pressing this button
permits setting values to be selected from the pull-down menu. The Up and Down buttons located on the
right side can also be used to change the value.
(5) Level release button [Level Release (ms)]
Displays the level sensing release time for each channel by means of numerical values. Pressing this
button permits setting values to be selected from the pull-down menu. The Up and Down buttons located
on the right side can also be used to change the value.
(3) Input/Output level meter
Displays the input/output signal and the threshold levels by way of the following bar graph when the D-901
is operating during communications between the D-901 and the PC.
Input signal level
Output signal level
Threshold level
Open threshold level
Close threshold level
L channel input level meter
R channel input level meter
L channel output level meter
R channel output level meter
If the hysteresis is set, both open and close threshold levels are displayed.
If Stereo Link function is set for channels, the level meters of both left and right channels are
simultaneously displayed.