Toa D-901 KR - Manual (Page 67)

67
17.3.3. Channel ON/OFF
Assign the channel ON/OFF function to the terminal.
Step 1. Press each channel's Function button to select "Channel On/Off" from the pull-down menu.
Step 2. Press the Control button to select the control method of "Make" or "Pulse" from the pull-down menu.
Step 3. Press the Position button to select "Input" or "Output" from the pull-down menu.
Step 4. Click the channel desired for ON/OFF setting in channel selection.
Note
In the "Pulse" control method, when the unit's power is turned off without performing the preset memory save,
the channel On/Off setting that has been remotely controlled by the D-981, D-983, or D-984VC reverts to the
status preset at the D-901.