Toa D-901 KR - Manual (Page 66)

66
17.3.2. Input/output volume adjustment
Assign the Volume Up or Down function to the terminal.
Step 1. Press each terminal's Function button to select "Volume Up/Down" from the pull-down menu.
The selected terminal's function is set to "Volume Up" and the terminal with the next number is set to
"Volume Down."
Step 2. Press the Position button to select "Input" or "Output" from the pull-down menu.
The positions of the two terminals are simultaneously set to the selected contents.
Step 3. Click the channel desired for volume adjustment in channel selection.
Note
When the unit's power is turned off without performing the preset memory save, the gain level that has been
remotely controlled by the D-981, D-983, or D-984VC reverts to the level preset at the D-901.