Mounting the expansion unit on a rack – Toa TS-910 Series Installation User Manual
Page 52
52
12.2. Mounting the Expansion Unit on a Rack
Expansion unit
Rack mounting bracket*
1
Blank bracket*
1
Fiber washer (for M5)*
1
5 x 12 rack mounting screw*
1
3 x 8 tapping screw*
1
*
1
Component parts and accessories
of MB-15B-BK
3 x 14 tapping screw*
1
3 x 14 tapping screw*
1
Expansion unit
Expansion unit
3 x 14 tapping screw*
2
Rack mounting bracket*
2
Fiber washer (for M5)*
2
*
2
Component parts and accessories
of MB-15B-J
Coupler*
2
5 x 12 rack mounting screw*
2
M3 x 12 machine screw*
2
3 x 14 tapping screw*
2
• Use the optional MB-15B-BK hardware set when mounting a single unit.
Remove 8 screws located on both sides of the unit, then attach the optional hardware as shown below.
• Use the optional MB-15B-J hardware set when mounting 2 units.
Remove 4 screws each located on left or right side of the unit, then attach the optional hardware as shown
below.