Toa TS-910 Series Installation - Manual (Page 51)

51
12. RACK MOUNTING
12.1. Mounting the Central Unit on a Rack
Step 1. Detach both side panels of the TS-910 Central Unit.
Removed screws are used in Step 2.
Side panel
Step 2. Attach the MB-TS900 Rack Mounting Bracket to both sides of the Central Unit.
Use the screws removed in Step 1.
Step 3. Mount the Central unit equipped with the mounting brackets in the rack.
Use the rack mounting screws and fiber washers supplied with the rack mounting bracket.
Fiber washer
(supplied with the MB-TS900)
Rack mounting screw 5 x 12
(supplied with the MB-TS900)
Screws removed in Step 1 (6 screws)
Note
Supplied 5 x 12 rack mounting screws are designed specifically
for TOA's equipment rack.
Do not use them for other rack mounting.
2
3