Toa TS-910 Series Installation - Manual (Page 46)

46
8.2. Sound source equipment use
Connect sound source equipment to the Central unit's AUX input and adjust its volume with the corresponding
AUX input volume control.
Sound source
equipment
Central unit TS-910
(Top panel)
AUX 1, AUX 2, or AUX 3 input volume control
(Rear panel)
AUX 1, AUX 2, or AUX 3
input terminal
Line output
9. RECORDING EQUIPMENT CONNECTION
Connect the recorder's recording input terminal to the Central unit's recording output terminal. If the recorder
has its recording level control, adjust it to an appropriate recording level.
Tip: For operation of the recorder, refer to the instruction manual included with the recorder.
Tip
Connection when a RCA plug cable is used.
Central unit TS-910
(Rear panel)
Recording output (REC OUT)
Recorder