Toa TS-780 Series - Manual (Page 34)

34
7.1.7. Using the Play list
You can use the Play list for playback.
When the sound source files used often are programmed in the Play list, only such programmed files can be
played back in order.
Note
To ensure correct operation of equipment, the number of the files to be registered in the Play list is limited to 80.
Registering more than 80 files may cause equipment malfunction.
[Registering to the Play list]
Step 1 Select the sound source file to be registered following the same
procedures as in Steps 1 to 6 of "Playback" (see p. 29).
Step 2. Press the OK button.
The operation selection menu is displayed.
Note
Do not remove the SD card to protect data.
Step 3. Press the Backward button or Forward button to select "Add P.
LIST."
Step 4. Press the OK button.
The selected sound source file is registered in the Play list.
Step 5. To register the next sound source file if there is, repeat Steps 1 to 4.
Step 6. When your desired sound source files are all registered, press
the Menu button.
The screen reverts to the Main Menu.
Note
The registered play list content is saved into the unit's internal memory, but
not in the SD card. After completion of the Play list registration, reverting
the screen to the operation selection menu with the SD card removed or
other SD card inserted causes the registered Play list content to be lost.
(When the DM1-004.MP3 is selected)
File Browser
DM1-0002.MP3
DM1-0003.MP3
DM1-0004.MP3
File Browser
DM1-0002.MP3
DM1-0003.MP3
DM1-0004.MP3
File Browser
DM1-0002.MP3
DM1-0003.MP3
DM1-0004.MP3
PLAY
Add P.LIST
File Browser
DM1-0002.MP3
DM1-0003.MP3
DM1-0004.MP3
PLAY
Add P.LIST
Main Menu
File Browser
Play Setting
Record Setting
or