beautypg.com

Recording – Toa TS-780 Series User Manual

Page 16

background image

16

7. RECORDING

In this system, the conference contents can be recorded and played back using the Central unit's internal MP3

recorder in MP3 format. It is also possible to perform recording using an external recording equipment.

7.1. Using the TS-780 Central Unit's Built-in MP3 Recorder

The conference contents can be recorded to and played back from the SD/SDHC card ("SD card" herein) in

MP3 format using the TS-780 Central unit's built-in MP3 recorder.

7.1.1. Nomenclature and Functions of the MP3 Recorder

DIGITAL AUDIO RECORDER

MENU

REC

SD CARD

OK

1

8

9

2 3 4 5 6 7

10

VOL.

0

10

Note

Be sure to press each button one by one. Simultaneously pressing two or more buttons may cause equipment

malfunction.
1. Display section

Displays such information as operation status,

selected sound source file name, and elapsed time.

2. Playback/Pause button [

]

Calls up the last played sound source file when

pressed, placing the recorder in pause state. When

pressed again, playback resumes.

The recorder is placed in pause state when this

button is pressed during playback. Besides, when

pressed in pause state, playback starts from the

pause position.

Note

The sound source file is not called up immediately

after power-on or SD card insertion even if this

button is pressed. Select the sound source file

from the Main Menu to play back.

3. Menu button [MENU]

Displays the Main Menu when pressed.

4. Backward button [

]

Used to select the MENU.

The display moves to the previously selected item

when this button is pressed.

When pressed during playback, the recorder

moves to the beginning of the previously selected

sound source file.

Holding down this button during playback

decreases the sound volume. Volume level set

here is the maximum volume adjustable with the

Volume control knob (9).

Note

If the volume has been set to "0" with this button,

audio signals are not output even when the volume

is increased with Volume control knob (9).

5. Forward button [

]

Used to select the MENU.

The display moves to the next selection item when

this button is pressed.

The recorder skips to the beginning of the next

sound source file when pressed during playback.

If skips to the beginning of the first sound source

file when pressed during the last track playback.

Holding down this button during playback

increases the sound volume. Volume level set here

is the maximum volume adjustable with the Volume

control knob (9).

6. Stop/OK button [ , OK]

Stops operation when pressed during recording.

Skips to the beginning of the sound source file

being played back when pressed during playback,

stopping the operation.

Confirms the setting contents when pressed during

various settings.

7. Record button [REC]

Places the recorder in recording pause state when

pressed once, and performs audio signal recording

when pressed again.

Recording format is MP3 only. Set the bit rate from

the menu. (See p. 22.)