Toa TS-780 Series - Manual (Page 31)

31
Step 11. To skip to the next sound source file during playback,
press the Forward button.
The recorder skips to the beginning of the next sound
source file in the sound source file list and continues to
play back.
Tip
Holding down the Forward button displays the volume
level in numerical value and increases it.
Adjustable range is from 0 (minimum) to 74 (maximum).
Default value is 74.
Volume level set here is the maximum volume adjustable
with the Volume control knob.
Step 12. To skip to the previous sound source file during playback,
press the Backward button.
The recorder skips to the beginning of the previous
sound source file in the sound source file list, and
continues to play back.
Note
Holding down the Backward button displays the volume
level in numerical value and decreases it.
Adjustable range is from 0 (minimum) to 74 (maximum).
Default value is 74.
Volume level set here is the maximum volume adjustable
with the Volume control knob. Therefore, if the volume
has been set to "0" through this operation, audio signals
are not output even if the Volume control knob is turned
fully clockwise.
Step 13. To stop playback, press the Stop button.
The recorder returns to the beginning of the sound
source file being played back and changes in stop state.
The operation indicator goes off.
Tip
To resume the sound source file playback at the stop
position, press the Playback/Pause button. However,
when the power is cycled or the SD card is inserted or
removed after playback was stopped, perform operation
again from Step 2.
Step 14. When the playback is finished, press the Menu button.
The screen reverts to the Main Menu.
18:04:57
DM1-0004.MP3
00:00:20
004/017 00:06:16
T
OFF
74
18:06:08
DM1-0004.MP3
00:00:20
004/017 00:06:16
T
OFF
33
18:06:21
DM1-0004.MP3
00:00:00
004/017 00:06:16
T
OFF
Main Menu
File Browser
Play Setting
Record Setting
To skip forward
To skip backward
To stop playback
When playback is finished