TeeJet Matrix Pro 840G User Manual - Manual (Page 87)

80
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
0.0 mph 32.85 ac
No GPS
12:32 PM 1 deg
8.9 <
Speed
Area
Time
Swath #
Heading
-13 7.2 mph
Mark A
Speed
Area
Time
Swath #
Heading
GUidANCE bAR
The Guidance bar keeps you informed of your choice of selectable job information (Current Speed, Accumulated Area, Current Time, Swath
Number and Heading), Navigation Activity (Cross Track Error (feet or meters), Current Activity and GPS Status) and Boom Status.
Figure 7-1: Guidance Bar Examples
Selectable Job Information
Speed – Displays the current speed of travel
Area – Displays the accumulated area that has had application
applied
Time – Displays the current time based on the selected time zone
Swath Number – Displays the current swath number in reference to
the initial guidance line. Number will be shown as a positive number
when the vehicle is to the right of the AB baseline or a negative
number when the vehicle is to the left of the AB baseline)
Heading – Displays the course of travel based clockwise from a
north base line. North = 0, East = 90, South = 180, West = 270.
Navigation Activity & Boom Status
GPS Status – Displays “No GPS” when GPS is unavailable or “Slow
GPS” when GPS is receiving GGA data at less than 5Hz.
Cross Track Error – Displays the distance from your desired
guideline.
Current Activity – Displays activities such as mark an A or B point,
approaching the end of a row, indicating to turn now and distance to
return to a marked point.
Boom Status – One dot is displayed for each boom section
programmed. A green dot indicates the section is active, a red dot
indicates the section is not currently active.
Navigation Activity & Boom Status
GPS Status
Cross Track Error
Current Activity Selectable Job Information
Selectable Job Information
Speed
Area
Time
Swath Number
Heading
Selectable Job Information
Selectable Job Information
Speed
Area
Time
Swath Number
Heading