TeeJet Matrix Pro 840G User Manual - Manual (Page 24)

17
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Guidance
The Matrix Pro allows product application and vehicle guidance to be
performed simultaneously. Once Unit Setup is complete, guidance can
begin. Five guidance modes allow the operator to optimize the field
work: Straight AB , Curved AB , Circle Pivot , Last Pass
and NextRow . Additional optimization can be accomplished with
Boundary Application , Curved Lookahead Return to Point
guidance and RealView Guidance Over Video . Three guidance
screens keep the user informed.
Vehicle View Guidance
creates a computer-generated image of
the vehicle position displayed in the application area
6.0 mph 7.6 ac
< 0.0 >
Field View Guidance creates a computer-generated image of
the vehicle position and application area from an aerial perspective.
6.0 mph 0 ac
Mark A
RealView Guidance allows live video input to be displayed
instead of a computer-generated image.
6.0 mph 0 ac
< 0.0 >
Side Tab Keys in Guidance
Two side tabs on the Guidance screens access setup options for:
Navigation and Guidance Options
• Guidance mode
• Next guideline
• Mark A or mark B
• Azimuth guidance
• Create boundary
• Mark and return to point
• BoomPilot
RealView Guidance
• Single or split camera view
• Guidance over video
• Steering angle indicator
NOTE: All settings are automatically saved when selected.
Figure 3-9: Navigation and Guidance Options*
-13 7.2 mph
> 0.0 <
A
A
A
B
0.0 mph 0 ac
Mark A
* Simulated screen example to show all possibilities.