TeeJet Matrix Pro 840G User Manual - Manual (Page 66)

59
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
video
Video Setup is used to set up individual cameras while using an
Eight (8) Channel or Four (4) Channel Video Selector Module (VSM)
or a single directly connected camera. Up to 8 cameras can be
configured if a VSM is installed.
1. Press CONFIGURATION side tab .
2. Press
Video
.
3. Select the appropriate check box(es):
►Reverse –
►Upside Down –
For normal video view
un-check all check boxes.
4. Press RETURN arrow or CONFIGURATION side tab to
return to the main Configuration screen.
Figure 6-57: Video
Configuration
Vehicle implement
AutoSteer Tilt
lightbar GPS
Video
Config-> Video
Video Setup Unavailable
If a camera or VSM is not connected, setup options will not be
available.
Figure 6-58: Video Unavailable
Configuration
Vehicle implement
AutoSteer Tilt
lightbar GPS
Video
RealView Camera Full Screen Video View
View video feed(s) and setup cameras without GPS available.
Options for RealView Guidance are not available on this screen.
1. Press REALVIEW CAMERA FULL SCREEN VIDEO VIEW
bottom tab .
Figure 6-59: RealView Camera Full Screen Video View
Config-> Video