TeeJet Matrix Pro 840G User Manual - Manual (Page 37)

30
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
VSM Not Installed
If a VSM is not installed, the REALVIEW OPTIONS icon (and
therefore the VIDEO icon and SPLIT VIEW icon ) is not
available and only one (1) video feed will be available.
Figure 5-2: VSM Not Installed
Inactive Camera Port
When a selected camera feed is not available, a blue screen with the
TeeJet logo will fill the screen of that port’s screen quarter.
Figure 5-3: Inactive Camera Ports
Single Camera Selection
One (1) of up to eight (8) camera views can be activated in RealView
Guidance if a Video Selection Module (VSM) is attached.
When an eight (8) channel VSM is on the system, up to eight (8)
cameras can be installed. When a four (4) channel VSM is on the
system, up to four (4) cameras can be installed.
To change active a single camera view:
1. Press REALVIEW OPTIONS icon to display RealView
options
2. Press the VIDEO icon .
3. Select the desired CAMERA
A
,
B
,
C
,
D
,
E
,
F
,
G
or
H
to change the active video feed.
Figure 5-4: Camera Selection
A B
C E E
F G H