TeeJet CenterLine 2.0 - Manual (Page 41)

CenterLine
Software Version 2.00
CenterLine 35
Tools
e-Dif Info
The “e-Dif Info” function only appears when the CenterLine system detects that an e-Dif GPS
receiver is present and calibrated. This receiver diagnostic test queries the attached e-Dif GPS
receiver and displays current position information being generated. This information is displayed in
the text window on the lightbar.
To start the e-Dif diagnostic test, go to the Tools menu, scroll until is displayed in
the text window, and press Enter. The lightbar displays the diagnostic messages shown in Table
17.
Demo
The Demo mode displays simulated guidance information on the lightbar. This is used primarily by
sales personnel to domonstrate the capabilities of the CenterLine system.
Next
The Next selection saves the setup information and returns the operator to the Start point on the
CenterLine menu.
To Start
The Start selection saves the setup information and returns the operator to the Start point on the
CenterLine menu.
Diagnostic Description
Number of
Satellites Displays the number of satellites that are providing a reliable signal to
the GPS receiver.
E Correction Age Displays the time since the last re-calibration.
Current Last
Position Displays the latitude and longitude and height of the last re-calibration
position.
Table 17: e-Dif Receiver Diagnostic Messages