TeeJet CenterLine 2.0 - Manual (Page 22)

16 CenterLine
CenterLine Setup
CenterLine
Software Version 2.00
% Overlap
Set the % overlaps to best fit your application 100% overlap will eliminate all skips.
Sections
Enter the number of sections 1-5.
Width 1-5
Enter the Width in ft for Boom section 1 and repeat for the remainder of the sections.
NOTE: The total width of all boom sections is NOT the width that will be used for guid-
ance.See “Width” on page 18 to enter the total guidance width.
Figure 14: %Overlap Settings
Figure 15: %Overlap Illustration
Figure 16: Number of Sections
Figure 17: Boom Section Width