TeeJet CenterLine 2.0 - Manual (Page 28)

22 CenterLine
CenterLine Setup
CenterLine
Software Version 2.00
Alarm
The setting, when set to ON, notifies the operator when entering a previously applied
area. The text window displays when the implement swath is in a previously applied
area of the field.
To adjust the Alarm setting, go to Guidance setup, scroll until is displayed in the text
window, and press enter. Using Up or Down, scroll between the and settings until
the desired setting is displayed in the text window. Press Enter to save the setting and return to
the Guidance setup menu.
Figure 27: Setting the Alarm
Setting Description
Off No applied area detection.
On Applied area detection alarm.
Table 5: Status Detect Settings