TeeJet IC18 SPREADER JOB COMPUTER - Manual (Page 39)

34
www.teejet.com
ISOBUS Job Computer : IC18 Spreader NA
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
Keys Descriptions
Icon Description
Home Key Press to return to the Home Screen
Information Key Press to toggle between display modes
Start/Stop Key Press to start or stop spreader
Section and Icon Descriptions
Section or Icon Description
Job Information This information bar displays the active count number,
applied volume and applied area
C n t 1 0 t o n 0 . 0 0 a c
Count Number Displays the current active trip or job number
Applied Amount Displays amount applied for the selected count number
Applied Area Displays applied area for the selected count number
Speed/Application
Information
Displays vehicle speed or amount applied per minute or RPM.
The Information Key toggles between display modes.
Remaining Bed Contents Displays the remaining bed content
NOTE: If no bed sensor is fitted or the contents are not entered in the Filling Menu
prior to spraying, Bed Contents will display “0”.
Application Rate Displays the actual application rate per hectare/acre
NOTE: When the Master is “On” the actual application rate per hectare/acre will be
displayed. When the Master is “Off” the target rate is displayed.
Alarm Displayed if an alarm condition is active
Roller RPM Displays the RPM of the belt roller
Spinner RPM Displays the RPM of the spinner