TeeJet IC18 SPREADER JOB COMPUTER - Manual (Page 16)

11
98-05173 R1 US
ISOBUS Job Computer : IC18 Spreader NA
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
CALCULATION MODE
The IC18 job computer is programed to calculate calibrations based on North American or European methods.
◄North America – Gate Height is calculated into the product application and calibrations will be based on pulses
per volume.
◄European – Gate Height is NOT calculated into the product application and calibrations will be based on
volume per pulse.
This setting has been established before leaving the factory, but it can be changed after purchase with assistance
from TeeJet Technologies Customer Service or your local dealer through the OEM setup menu options.
Figure 3-1: North America
This manual discusses specifically the functions and options in Noth America Mode. See the specific IC18
Spreader: European User Manual for functions and options in European Mode.
CHAPTER 3 – MAIN SETUP
Main Setup Mode configures the Counters, Job Parameters, Machine, User Interface, Communication
and Help options.
NOTE: The menu structure on your display might vary from the one displayed in this User Manual
depending on the virtual terminal being used.