Sonics E-Press - Manual (Page 6)

Sonics E-Press Manual Page 6
IMPORTANT SERVICE LITERATURE
Please read carefully before operating the equipment
The plastics assembly system supplied with this instruction manual is constructed of the finest available
components with workmanship that meets or exceeds our highest manufacturing standards. It has been
thoroughly tested and inspected before leaving the factory and when used in accordance with the procedures
outlined in this manual, will provide you with many years of safe and dependable service.
MANUAL INFORMATION
We continually strive to keep up with latest electronic developments by adding circuit and component
improvements to our equipment as soon as they are developed and tested.
In order to move around the manual quickly, hyperlinks are provided in the following Table of Contents (TOC)
for each major section. Click the hyperlink to move directly to the selected section. At the top of each linked
heading you will find a TOC link to return to the Table of Contents. This should help to minimize continuous
page up/down key-strokes to find a section of interest.
For the purposes of this manual, references to the “GX controller” or to the “ultrasonic power supply” will mean
the associated ultrasonic supply and microprocessor controller. References to the “motor controls” or “stepper
system” will mean the transport controls for velocity and distance. Certain ult
rasonic control parameters can
affect the stepper control performance. The GX Ultrasonic Power Supply manual must be considered an
integral part of understanding the Stepper Welding System.
Basic Windows familiarity is assumed. The user must be familiar with Windows based file selection and
mouse operations. Consult a Windows tutorial if these operations are unfamiliar. Manual descriptions will not
address these basic concepts.
Internet familiarity is also assumed. URL addresses have been included in a few sections to assist with
downloads for viewing this manual. If Internet access is not available these references may be ignored.
Manuals for all new Sonics & Materials products are provided on CD.
We reserve the right to make any changes in the design or construction of our equipment at any time, without
incurring any obligation to make any change whatsoever in units previously delivered.