Sonics E-Press - Manual (Page 35)

Sonics E-Press Manual Page 35
Upper Tolerance
– The search window position above the taught position which is the expected maximum
limit where the parts will be found. This position is used to end the travel approach speed and defines the
start of the creep speed zone used to detect the parts.
Ultrasonic controls
– The GX ultrasonic controller.
Weld Time
– The programmed ultrasonic time in the GX Controller.
Weld Velocity
– The programmed speed used to advance the head assembly during the weld time. Two
speed changes can be programmed during the weld and/or hold times.
Weld Distance
– The distance to travel during the weld. Two weld distance steps can be programmed during
the weld time.