Sonics E-Press - Manual (Page 32)

Sonics E-Press Manual Page 32
Any characters that have not been printed will automatically print when the option this turned off or the
stepper utility program is closed. The Printer indicator at the lower left center of this form will turn green
while the printer option is ON. It will be red when the selection is OFF.
4. Set-Stepper
– The Set-Stepper menu selection will unload the monitor \ logging form and display the
Stepper Setup form. The Set-Stepper form is used to program the motor controls as previously
described.
5. Notepad
– The Notepad selection is an easy way to launch the windows system Notepad program.
Notepad can be used to view the data file created by the file logging operation. If the windows Notepad
program cannot be found, a message box will indicate the condition.