Motion mount components, Hardware and system requirements, Red motion mount operation guide – RED MOTION MOUNT User Manual

Page 7

RED MOTION MOUNT OPERATION GUIDE

955-0013, REV-E | 7

MOTION MOUNT COMPONENTS

Each MOTION MOUNT package contains one of the following:

DSMC RED MOTION MOUNT Ti PL

‒ DSMC Mount Body Cap

‒ DSMC Mount Back Cap

DSMC RED MOTION MOUNT Ti Canon

‒ DSMC Mount Body Cap

‒ DSMC Mount Back Cap

IMPORTANT: If any components are damaged or missing, please file a support ticket at

HARDWARE AND SYSTEM REQUIREMENTS

The MOTION MOUNT is compatible with all DSMC BRAINs.

DSMC firmware v5.1.14 or later

REDCINE-X PRO

Build 20.0.0 or later

NOTE: RED MOTION MOUNT Ti PL and RED MOTION MOUNT Ti Canon use identical filter and shutter

mechanisms. The only differences between the mounts are the mechanical locking systems and compatible

lenses.
NOTE: The MOTION MOUNT is 0.9 mm longer than the respective DSMC Ti PL Mount and DSMC Canon Mount.

MOTION MOUNT Ti PL (left),

MOTION MOUNT Ti Canon (right)