Display neutral density (nd) settings, Red motion mount operation guide – RED MOTION MOUNT User Manual
Page 17
RED MOTION MOUNT OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0013, REV-E | 17
DISPLAY NEUTRAL DENSITY (ND) SETTINGS
You can configure how the ND settings display in the DSMC graphical user interface (GUI).
1. Navigate to Menu > Settings > Display > Modes > Lens.
2. Select the desired MOTION MOUNT ND display setting:
‒ Fraction: Displays the neutral density value as a fraction of light transmission.
‒ Density: Displays the neutral density value as an optical density value.
‒ Stop: Displays the neutral density value as a stop loss.
3. Select Close to exit.
The ND value displays in the top left corner of the Live Action Area on the DSMC GUI.
NOTE: Using a high ND with wide apertures may cause asymmetrical bokeh. If you select an ND value over
4.00 stops with “ND Only” selected, the ND value on the main screen overlay turns yellow. A warning
message also displays in the MOTION MOUNT menu on the DSMC. For more information about bokeh
asymmetry, go to