beautypg.com

Swabs, wipes, and cleaning solutions, Red motion mount operation guide – RED MOTION MOUNT User Manual

Page 25

background image

RED MOTION MOUNT OPERATION GUIDE

COPYRIGHT © 2014 RED.COM, INC

955-0013, REV-E | 25

SWABS, WIPES, AND CLEANING SOLUTIONS

Before cleaning the optical surface with swabs or wipes, ALWAYS use an air bulb to remove any solid particles.

Cleaning an optical surface without removing solid particles greatly increases the risk of scratching the surface.
If you MUST clean the optical glass, use lens-grade wipes or flexible uniform swabs and a high-quality sensor

or lens cleaning solution.
Follow the instructions below:
1. Apply a few drops of cleaning solution directly to the swab or wipe.
2. Gently sweep the swab or wipe across the length of the glass in a uniform motion.

When using a swab: Ensure that the swab provides full coverage of the glass. Gently sweep the swab

across the length of the glass. DO NOT place the corners of the swab on the glass.

When using a wipe: Gently sweep the wipe across the length of the glass with a flat, non-rigid flexible

instrument in a uniform motion. DO NOT sweep the wipe across the glass with your finger.

WARNING: DO NOT reuse swabs or wipes, since they may have gathered dirt or debris from the glass.