RED MOTION MOUNT - Manual (Page 5)

RED MOTION MOUNT OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0013, REV-E | 5
SAFETY INSTRUCTIONS
Heed all cautions and warnings in these instructions.
Read these instructions before operating the lens mount.
Follow these instructions while operating the lens mount.
Keep these instructions with the lens mount at all times.
DO NOT attempt to modify, dismantle or open your lens mount
as doing so may expose you to electric shock and serious injury.
There are no user-serviceable parts inside. Alteration or repairs
made to the lens mount, except by a RED authorized service
facility, will void the Limited Warranty. Users are not permitted
to make design changes or otherwise modify the operation of
the lens mount without the express written approval of RED.
Install lens mount in accordance with the manufacturer’s
instructions.
DO NOT use the lens mount near water. Avoid exposing your
lens mount to moisture. The unit is not waterproof, so contact
with water could cause permanent damage to the unit as well
as electric shock and serious injury to the user. DO NOT use
the lens mount in the rain or under other conditions with high
moisture without appropriate protection, and immediately
remove power source if the lens mount is exposed to moisture
while attached to the camera.
WARNING: To reduce the risk of fire or
electric shock, do not expose the lens
mount to rain or moisture.
DO NOT expose your lens mount to excessive vibration or
impact (shock). Be careful not to drop your lens mount. Internal
mechanisms may be damaged by severe shock. Mechanical
alignment of optical elements may be affected by excessive
vibration.
When cleaning your lens mount, remember that it is not
waterproof and moisture can damage electronic circuitry. DO
NOT rinse or immerse any element of the lens mount, keep it dry
at all times. DO NOT use soaps, detergents, ammonia, alkaline
cleaners, and abrasive cleaning compounds or solvents. These
substances may damage the glass coating and electronic
circuitry. DO NOT use compressed air.
DO NOT operate or store near any heat sources such as
radiators, heat registers, stoves, or any other apparatus that
produces heat. Store in a protected, level and ventilated
place. Avoid exposure to temperature extremes, damp, severe
vibration, strong magnetic fields, direct sunlight or local heat
sources during storage. Recommended storage and usage
temperatures for your lens mount are:
‒ Operating range: 0°C to 40°C (32°F to 104°F)
‒ Storage range: –40°C to 80°C (–40°F to 176°F)
If there are any performance issues with your lens mount when
operating within this temperature range, please file a support
ticket at https://support.red.com/home .
CAUTION: Refer all service and repair
to qualified RED service personnel. To
reduce the risk of electric shock, and
damage to the lens mount, DO NOT
attempt to perform any servicing other
than procedures that are recommended in
the operating instructions.