PRG Mbox Designer Manual 3.8 - Manual (Page 160)

152 MBOX ® MEDIA SERVER USER MANUAL
Step 4. At Blackmagic Design Decklink window, click on "Set input" pop-up menu to select an appropriate input
type. The three possible selections are: SDI Video, Y, R-Y, B-Y Video, and NTSC/PAL (Y in). These
correspond to SDI, Component, and Composite video input types. Because Mbox does not use the audio
input on the Decklink Video Capture card, the audio type in each of the inputs can be ignored.
Step 5. Close Blackmagic Design Decklink window.
To configure Mbox video inputs for Decklink or Phoenix cards:
Step 1. Launch Mbox Designer application and go to Mbox Setup tab.
Step 2. At Video Inputs section, click setup button for the index number (Folder 255, File 252 - 255) that you want to
assign the video input to.
Step 3. Configure Video Inputs window depending on the type of card: