Replacing a 2a fuse – PRG Bad Boy Field Service Manual User Manual
Page 76

68
BAD BOY
®
SPOT LUMINAIRE FIELD SERVICE MANUAL
Replacing a 2A Fuse
2 Amp fuses are located on the Zoom Controller PCB (4 each) and the Wheel Controller PCB (4 each).
Parts:
70.3769.0002.0
8 EA
FUSE, 2AMP SLO-BLO
Tools:
#2 Philips screwdriver
Needle-nose pliers, small
WARNING:
Remove power from luminaire before performing any maintenance procedures.
To replace a 2A Fuse:
Step
1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step
2. Remove Head Cover(s) as required. (Refer to
Step
3. At required PCB, use needle-nose pliers to carefully remove and replace 2A fuse.
Figure 3-32: Removing 2A Fuse
2A Fuse
CAUTION:
Use anti-static precautions
when working with PC boards.