PRG Bad Boy Field Service Manual - Manual (Page 25)

BAD BOY ® SPOT LUMINAIRE FIELD SERVICE MANUAL 17
TROUBLESHOOTING
Errors
The Status menus can be used to determine if any luminaire
mechanisms are reporting errors. The Status panel at the
Home screen will report overall luminaire conditions as
follows:
+ CALIBRATION (yellow)
+ OK (green)
+ ERROR (red)
+ LOCKED (white)
Pressing the Status panel will bring up the Status screen (as
shown at right). The Status screen will indicate which specific
mechanisms, if any, have errors. It also provides a log of
systems activity. The Status panel operates as follows:
+ Mechanisms - displays mechanism status. Mechanism
names (sub-code abbreviations) will be shown in yellow if
calibrated, green if okay, and red if an error exists. If an
error exists, press the Mechanisms panel to bring up the
Recalibration screen. Try recalibrating the mechanism(s)
that is reporting the error. If calibration fails, refer to
"Component Troubleshooting" on page 20.
+ Log - displays system log. Use touchscreen arrows to
scroll up or down. Press CLR to bring up Clear Log Yes/
No options.
Press STATUS to
bring up Status screen
Press MECHANISMS to
bring up Recalibrate screen