PRG Bad Boy Field Service Manual User Manual

Page 61

Text mode
Original mode

BAD BOY

SPOT LUMINAIRE FIELD SERVICE MANUAL

Step

5. At Wheel Stack Assembly, remove four 8-32 x 1/2" socket head screws (Figure 3-20).

Step

6. Verify that Lens Group 1 will not interfere with removal of Wheel Stack Assembly. If lenses are in the way,

turn Group 1 pulley until lenses are clear.

Step

7. Grasp Wheel Stack Assembly on either side and lift straight up and out of luminaire head.

Figure 3-20: Removing Wheel Stack Assembly

Step

8. Replace Wheel Stack Assembly by doing steps in reverse.

Wheel Stack
Assembly

8-32 x 1/2"
SCB Screw (4)

Lens Group 1

Depending on the Bad Boy luminaire
model, the Wheel Stack Assembly will be
different. The CMY Wheel Stack can be
identified by a label on the outer plate.

NOTE: