Replacing the uv/ir window assembly – PRG Bad Boy Field Service Manual User Manual
Page 74

66
BAD BOY
®
SPOT LUMINAIRE FIELD SERVICE MANUAL
Replacing the UV/IR Window Assembly
Parts:
22.9812.0616
1 EA
ASSY, UV/IR WINDOW
Tools:
#2 Philips screwdriver
#1 Philips screwdriver, stubby
WARNING:
Remove power from luminaire before performing any maintenance procedures.
CAUTION:
Do not touch UV/IR Window with bare fingers. If dirty, clean with OptiMax™ Ultra Pure Cleaning
Solution and a Micro Fiber cloth.
To replace the UV/IR Window Assembly:
Step
1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step
2. Remove Head Covers. (Refer to
Step
3. Remove Wheel Stack Assembly. (Refer to
Step
4. Remove UV/IR Assembly by removing four 4-40 x 1/4" PPSS screws (Figure 3-30).
Step
5. Replace UV/IR Assembly by doing steps in reverse.
Be sure to align fan ducts
.
Figure 3-30: Removing UV/IR Window Assembly
UV/IR Window
Assembly
4-40 x 1/4" PPSS
Screw (4)
Duct Hole
Fan
INTERIOR DETAIL VIEW
Duct