Cleaning the uv/ir window – PRG Bad Boy Field Service Manual User Manual
Page 49

BAD BOY
®
SPOT LUMINAIRE FIELD SERVICE MANUAL
41
Cleaning the UV/IR Window
Tools:
Micro Fiber cloth (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
#2 Phillips screwdriver
To clean UV/IR Window:
CAUTION:
Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO NOT use
Window Cleaner on the UV/IR glass!
WARNING:
Remove power from luminaire before this procedure.
Step
1. Remove power from luminaire and allow components to cool for at least 5 minutes.
Step
2. Access UV/IR Window Assembly as required. Refer to
"Replacing the UV/IR Window Assembly"
Step
3. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, clean UV/IR glass as required.
DO
NOT use window cleaner!
Step
4. Re-assemble luminaire.
Figure 3-10: Cleaning UV/IR Window
Aft Cover
UV/IR Assembly