PRG Bad Boy Field Service Manual - Manual (Page 62)

54 BAD BOY ® SPOT LUMINAIRE FIELD SERVICE MANUAL
To pack Wheel Stack Assembly for shipping:
If a Wheel Stack Assembly is to be shipped to a PRG Service Center, a Wheel Stack Road Case (20.9812.1229)
should be used. This will protect the fragile components of the Wheel Stack Assembly during storage, transport and
shipping.
Step 1. Carefully lower Wheel Stack Assembly into road case as shown in Figure 3-21.
Step 2. Document luminaire serial number and reason for failure.
Step 3. Apply a pre-printed shipping label to top of case. (Labels can be found in a plastic bag taped to the inside
of the road case.)
Figure 3-21: Packing Wheel Stack Road Case
ADDRESS
LABEL
Address Label
C
M Y
Depending on the Bad Boy luminaire
model, the Wheel Stack Assembly will be
different. The CMY Wheel Stack can be
identified by a label on the outer plate.
NOTE: