PRG Controlling VARI-LITE Equipment Using DMX 512 - Manual (Page 78)

DMX512 R EFERENCE G UIDE
7 0 02.3004.0300.54
VL7 Vertical Hang Assemblies
A special vertical hang can be achieved by using a vertical hang assembly. This assembly consists of
several components that attach to the truss clamp. Depending on the truss clamp, round pipe or
adjustable (square pipe), a different vertical hang assembly will be required.
Round Pipe Vertical Hang
The Round Pipe Vertical Hang Assembly (21.9650.4115) utilizes a 2" round pipe truss clamp, an
adapter, a support tube, and a standard Series 300 double truss hook. When assembled with U-Bolts
and attached to the VL7 pan tube, a supported vertical hang on 2" round pipe can be obtained as
shown.
Figure 3-8: VL7 Vertical Hang - Round Pipe
VERTRND
2" Round Pipe
Truss Clamp
S300 Double Truss Hook
Support Tube
Hang Adapter
Spacer
INSTALLED VIEW
Luminaire Not Shown
Pin
3/8" U-Bolt Kit w/ Hardware
5/16" U-Bolt Kit w/ Hardware