PRG Controlling VARI-LITE Equipment Using DMX 512 - Manual (Page 111)

T ESTING AND T ROUBLESHOOTING : T EST S OFTWARE
0 2. 3 0 0 4. 0 3 00 . 5 4 103
4
8 Gobo position 6
7 Cycle from wheel position 0
to position 3 CW, from posi-
tion 3 to position 0 CCW
repeatedly. Pause briefly on
position 0 and 3
6 Cycle from wheel position 0
to position 2 CCW, from
position 2 to position 0 CW
repeatedly. Pause briefly on
position 0 and 2
5 Continuous change CW to
next gobo position on wheel
(from 2 to 3,5 to 0) Gobos on
wheels do not rotate. Pause
briefly on each gobo
4 Cycle from wheel position 0
to position 2 to position 0
CW repeatedly. Pause
briefly on position 0 and
2(25%)
3 Cycle from wheel position 0
to position 2 CCW, from
position 2 to position 0 CW
repeatedly. Pause briefly on
position 0 and 2 (45%)
2 Cycle from wheel position 0
to position 2 CCW, from
position 2 to position 0 CW
repeatedly. Pause briefly on
position 0 and 2 (45%)
1 Cycle from wheel position 0
to position 2 CCW, from
position 2 to position 0 CW
repeatedly. Pause briefly on
position 0 and 2 (85%)
0 Cycle from wheel position 0
to position 2 CCW, from
position 2 to position 0 CW
repeatedly. Pause briefly on
position 0 and 2 (100%)
010 Index 9 Cycle from index 0 to index
30 CW, from index 30 to
index 0 CCW repeatedly.
Pause briefly on index 0 and
30 (85%)
8 Cycle from index 0 to index
5 CCW, from index 5 to
index 0 CW repeatedly.
Pause briefly on index 0 and
5
Table 4-5: VL6B/VL6C/VL6C+ Spot Luminaire Mechanical Tests (Continued)
Test Number Test Parameter Error Codes/Comments