Mini ac line disconnect (30a) – PRG Controlling VARI-LITE Equipment Using DMX 512 User Manual
Page 35

E
QUIPMENT
D
ESCRIPTION
: P
OWER
AND
D
ATA
D
ISTRIBUTION
E
QUIPMENT
0 2. 3 0 0 4. 0 3 00 . 5 4
27
2
Mini AC Line Disconnect (30A)
CAUTION: Although the maximum operating limit is 30A, we recommend that continuous operating
current does not exceed 20A.
The mini (30A) AC line disconnect is a safety device containing a three-
phase, 30A circuit breaker serving as a master on/off switch for the
system. It is similar to the 200A AC line disconnect, but is used
primarily for smaller systems. The unit connects to 30A service through
a 10-foot, 8/5 pig tail. There are two types of cable assemblies:
receptacle connector to bare pigtails, and receptacle connector to plug
connector. The mini line disconnect connects to the mini-ACS rack with
a 20- or 80-foot, 8/5 cable assembly. One line disconnect is required for
each 30A service.
CAUTION: The mini (30A) AC disconnect is not approved for use in Europe.
Figure 2-2: Mini AC Line Disconnect
INPUT
OUTPUT
Power
Indicator
Bare wire to Hubbell connector
Hubbell to Epic connector
from house AC service
to Mini-ACS Rack