Philips LC3500G199 - Manual (Page 8)

R emothe C ontrol U nit
VCR BUTTONS
For use of VCR (Video Cassette Recorder)
buttons see "Remote Control Operatioin of
a VCR" on page 9.
VCR POWER BUTTON
Press to turn VCRs ON and OFF.
MENU BUTTONS
Press the MENU button to display On-
Screen feature controls. Press A or T
buttons to move forward and backward
through the list of On-Screen items. Press
or ►to select an On-Screen item and
adjust settings. Press the EXIT button to
clear the screen after control adjustments.
Also press the EXIT button to see the
current channel number or source on the
projector screen.
ZOOM AND FOCUS BUTTONS
Press ZOOM +/' to cotrol ZOOM.
Press FOCUS +/- to cotrol FOCUS.
You can enable/disable the zoom and focus
controls using the LENS CONTROL
menu (See page 27).
MUTEBUTTON
Press to turn the sound of the projector
OFF. Press again to return the sound to its
previous level.
TIMER BUTTON
Set the Projector to turn itself OFF
automatically (See page 35 for details).
RESET BUTTON
Selection of 4 personal preference settings
and one Factory preset.
PROIECTORA^CR SWITCH
Press to operate a VCR. Do not press to
operate the projector.
PROTECTOR POWER BUTTON
Press to turn projector ON and OFF.
BRIGHTNESS BUTTON
Press to adjust the brightness level.
VOLUME BUTTON
Press to adjust the sound level.
NUMBER BUTTONS
Press these buttons to select items in the
menu's.
CURTAIN BUTTON
When the projector is in the DATA
INPUT mode, press DATA to blank the
projector picture with a pre-defined curtain
(see page 33 for details).
DIRECT ACCESS BUTTONS
Press to select one of the e.xtemal input
sources. Direct access is not possible when
the menu is activated.
To bad the supplied (9 Volt)
battery into the remote:
BEGIN
Remove the battery
compartment lid on the back of the
remote.
Place the battery in the remote.
Be sure to line the (+) and (-) ends of the
battery up correctly.
Reattach the battery lid.
Bottom of remote control unit