Philips LC3500G199 - Manual (Page 24)

P icture S elect C ontrol A djustments ( continued )
3. PICTURE SELECT - S-VIDEO
T he S(nper)'VIDEO connection available
on the rear of the Projector can result in far
better picture clarity and detail, for the playback of
VCR tapes or Video Discs, than the normal
connections.
Note: The VCR (or Compact Disc Player) must
be equipped with a S-VIDEO OUT(put) jack in
order to complete the connections shown on this
page.
BEGIN
^
Connect the S-VIDEO (or S-VHS)
OUT jack from the VCR (or CDV) to the
S-VIDEO IN jack on the Projector.
4>,
Connect the AUDIO OUT jacks
R(ight) and L(eft) from the VCR to the
AUX 1 AUDIO IN jacks on the Projector.
:
Select PICTURE SELECT control
on the Projector.
With the MAIN Menu displayed, press 3 for
PICTURE SELECT.
N/ Press the or ► button to place the
Projector in the AUX 1 mode for
S-VIDEO 1.
"AUX 1" is highlighted to confirm the
setting.
< 5> ,
Turn the VCR (or CDV) ON and
place it in the S-VIDEO (or S-VHS)
playback mode. Insert S-VHS cassette tape
and playback in a normal manner.
Press EXIT to see: S-VIDEO.
Remember. The S-VIDEO
connecting cable will be supplied with the
S-VHS VCR (or Compact Disc Player).
S-Video (or S-VHS) and audio can also be
connected to the front panel jacks (AUX 3)
Do not connect simultaneously equipment to
the S-VHS and VHS input.
Back of Projector
IL
TiV 1
m
I—II—I
Otg o o o o o o
goQllooolloool
e
S-VIDEO OUT
VCR
I AUX 11 AUX 2 AUX 3 RGB
4 ‘ 5
7 ' 8 ' 9
« 0
LCD
Remote
PICTURE SOURCE
PICTURE SELECT
Adjustment
Selected
24