Philips LC3500G199 - Manual (Page 14)

G etting S tarted - B asic P rotector O peration
'ou can operate your Projector using the
controls on the set itself.
I BEGIN I
Press in the MAIN POWER button at
the back of the set to turn the Projector ON.
(For new sets this button is on).
:
Press the POWER ON/STANDBY
button on the front of the Projector.
A green light above the button lights up.
Press the VOLUME ▲ (UP) or T
(EXDWN) buttons to adjust the sound level.
' Remember. When you first switch on,
theTast'Selected source is selected automatically
and its number appears briefly on the screen.
After that, just press the STATUS button to
see wlwt source is selected.
Remember. During starting of the set
a 'sparking' noise may be heard. This is quite
normal.
Projector Back Panel
O EXTERNALSPEAKERS 0
igii
Front of Projector
«
1 1^ ^
TO SWITCH OFF
BEGIN
Stand By:
Press the POWER ON/STAND BY
button on the front of the Projector.
Completely off:
Press the MAIN POWER button
(at the back of the Projector ) so it goes to
the OUT position.
' Remember. After switching off
Mffilhe POWER ON/STAND BY button
(or with the Remote ) the cooling fan will
run for a few more minutes. It is advised
not to press the MAIN POWER button
before the fan has stopped.
Front of Projector
Projector Back Panel
O EXTERNAL SPEAKERS O
lili
MAIN POWER ®ySk®A= .
SPEAKER X
14