Philips LC3500G199 - Manual (Page 23)

P
icture
S
elect
C
ontrol
A
djustments
(
continued
)
3. PICTURE SELECT -
AUX 1,2 and 3
T he Projector's Picture Source controb aUow
you to tise the INPUT Jacks (Audio,
Video and S(uper)~Video heated on the front and
rear of tite Projector. The Projector's INPUT
jacks may be used for direct picture and sound
connections with VCRs (or Video Disc Players,
etc) dtat have their own Audio/Video OUTPUT
jacits.
To view the playback of a VCR tape (or Video
Disc) by using the Audio/Video jacks on the
Projector:
BEGIN
Connect the VIDEO OUT jack
from the VCR (or CDV) to the AUXl
VIDEO IN jack on the Projector.
Connect the AUDIO OUT jacks
R(ight) and L(eft) from the VCR to the
AUX 1 AUDIO IN jacks on the Projector.
4>
Select PICTURE SELECT control
on the Projector.
With the MAIN Menu displayed, press 3 for
PICTURE SELECT.
Press the or button to place the
Projector in the AUX 1 mode.
"AUX I" is highlighted to confirm the
setting.
Press EXIT to clear screen.
Turn the VCR (or CDV) ON and playback
the tape (or disc) in a normal manner.
Connections and operation of the
Projector's AUX 2 and 3 INPUT jacks are the
.sime as those described for the AUX 1 jacks
(e.\cept" AUX 2 or 3" is selected as the
PICTURE SOURCE)
PICTURE SOURCE RGB
Connect RGB and SYNC to the AUX 2
inputs and select RGB as picture source.
(Tlie SYNC signal must be composite
negative sync.)
(Continued on next page)
Back of Projector
cTTp
VCR
4 , 5 ' ' 6
I 7 I 8 ' ■ 9 '
Remote
ni olri
OUT
TELEVISION ADJUSTMENTS
1. AUDIO
2. VIDEO
|3. PICTURE SELECTi
4. DATA INPUT
5. FEATURES
I AUX 1 AUX 2 AUX3 RGB
I PICTURE SOURCE I
PICTURE SELECT
Adjustment
Selected
(Continued on next page)
23