Etting, Tarted, Rojector – Philips LC3500G199 User Manual
Page 10: Creen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G
etting
S
tarted
- S
etting
up
the
P
rojector
+ S
creen
P
roper installation of your Projector mil
ensure that you make the most of the
set’s features. Read all of pages 10 throu^
14 carefully before starting to install your
Projector.
1) Choose the screen position
You get maximum picture contrast when
the least ambient light falls on the
screen. Place the screen where light from
windows, room lighting etc. does not
disturb the picture.
2) Choose the Projector position
Ideally, the Projector should be located
at about the same height from the floor
as the top of the screen and directly in
front of it.
The Projector can be placed on a wall-
mounted shelf (minimum size 17 x 24
inches), a cabinet top, or a rack can also
be used. Make sure you can hide the
cables connected to the set.
The Projector has adjustable feet at the
rear. Turn these if you need to point the
Projector downwards to the screen.
1. LIGHTING
2. MOUNTING
Side view
Projector
Top of screen
Projection Screen
Top view
90’
Side view
to
lower
to
raise
(Continued on next page)
10