Philips LC3500G199 - Manual (Page 13)

G
etting
S
tarted
- A
udio
C
onnections
EXTERNAL SPEAKERS
’’ou can connect external speakers to enjoy
stereo sound.
BEGIN
Connect external speakers to the
speaker wire terminals on the Projector.
Speakers: 8 ohm, 10 watt minimum.
Turn Projector on. Select AUDIO
Menu and place the Projector in the
STEREO mode (See page 19).
Place the speakers so you enjoy
good stereo sound.
.
I BEGIN
Connect the R(ight)and L(eft)
AUDIO OUT(put) jacks on the Projector
to the R and L AUDIO IN(put) jacks on
your amplifier or sound system.
First turn your Projector on; then
your audio system. Adjust the sound level
coming from the Projector with the audio
amplifier VOLUME control.
Remember. The audio system may
have to be in AUX mode to play the sound
of the connected signal.
AUDIO OUTPUT JACKS
T he AUDIO OUTfput) jacks on tfie rear of
the Projector may be used to play the sound of
tite connected signal througli an audio hi-fi system.
External Speakers
Projector Back Panel
AUDIO SYSTEM
PC (VGA OR MAC II-INPUT)
Y ou can connect a personal computer to
display the computerscreens onto the
Projector screen
First turn OFF your computer and
Projector.
Use a Sub'D plug to connect your
computer to the DATA input socket.
If available, connect the audio (R+L,
or mono) to the RCA jacks of AUX 2 (See
page 7).
Computer Back Panel
13