NM Engineering 83.159.4300.72 - Manual (Page 22)

3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
www.stoptech.com 22
Reinstall the wheels, and torque the lug nuts to your wheel manufacturer’s specifications. It may be
necessary to snug the bolts before lowering the vehicle, and to then torque the wheels when the car is
on the ground. Alternatively, an assistant may depress the brake pedal while you tighten the wheel
nuts to the proper torque setting.
It is very important to check the wheel-to-caliper clearance before installing wheels!
N N N N Note: S ote: S ote: S ote: S ote: Some wheels ar ome wheels ar ome wheels ar ome wheels ar ome wheels are balanced on the inside, with adhesiv e balanced on the inside, with adhesiv e balanced on the inside, with adhesiv e balanced on the inside, with adhesiv e balanced on the inside, with adhesive-backed lead w e-backed lead w e-backed lead w e-backed lead w e-backed lead weights. If the eights. If the eights. If the eights. If the eights. If the
w w w w weight is on the outboar eight is on the outboar eight is on the outboar eight is on the outboar eight is on the outboard edge, behind the spokes, it may inter d edge, behind the spokes, it may inter d edge, behind the spokes, it may inter d edge, behind the spokes, it may inter d edge, behind the spokes, it may interfer fer fer fer fere with the caliper e with the caliper e with the caliper e with the caliper e with the caliper. If neces- . If neces- . If neces- . If neces- . If neces-
sar sar sar sar saryyyyy, note the w , note the w , note the w , note the w , note the weight and location of the lead, and place a new piece of the same w eight and location of the lead, and place a new piece of the same w eight and location of the lead, and place a new piece of the same w eight and location of the lead, and place a new piece of the same w eight and location of the lead, and place a new piece of the same weight fur eight fur eight fur eight fur eight further ther ther ther ther
inboar inboar inboar inboar inboard or outboar d or outboar d or outboar d or outboar d or outboard, to clear the caliper d, to clear the caliper d, to clear the caliper d, to clear the caliper d, to clear the caliper. If y . If y . If y . If y . If you r ou r ou r ou r ou rotate the tir otate the tir otate the tir otate the tir otate the tires r es r es r es r es regularly egularly egularly egularly egularly, check the lead w , check the lead w , check the lead w , check the lead w , check the lead weight eight eight eight eight
positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized.
Carefully test-drive the vehicle in a safe area, at low speed, to ensure that all components are working
correctly. Then follow the pad and rotor bed-in procedure on the following pages.
Step 9 Step 9 Step 9 Step 9 Step 9
R
R R R Reinstall einstall einstall einstall einstall Wheels Wheels Wheels Wheels Wheels