beautypg.com

NM Engineering 688856 User Manual

NM Engineering For the car

background image

NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX

[email protected] ∞ www.nm-eng.com








PARTS INCLUDED:

TOOLS REQUIRED:

[1] Titanium Head Shield

[3] M5x8mm SS Button Head Bolt

[1] 10MM Wrench

[1] 13MM Wrench

[2] Aluminum Hex Stand-Offs [3] 5mm SS Washer

[1] 3mm Hex Key Wrench

[1] Stainless Steel Support Bracket


1.

Using a 10mm wrench, remove turbo housing bolt.

2.

Mount supplied SS Support Bracket to turbo housing using
original bolt.

3.

Torque bolt to 20Nm (15ft-lbs.). Top surface should be
horizontal. Correct as necessary.

4.

Install Hex Stand-offs into threaded ears on cylinder head.

5.

Tighten using a 13mm wrench.

6.

Mount NM Titanium Heat Shield using M5x8mm SS button
head bolts and M5 SS washers supplied, and then tighten with
3mm hex key wrench. Installation is complete.






©2009 NM Engineering, a division of Automotive Performance Systems, Inc.
All rights reserved. Reproduction in whole or in part is prohibited.
DOC. NM.688856 Rev. 09.16.09

TITANIUM HEAT SHIELD – NM.688856

[R55] MINI Cooper S & JCW Clubman 2008-up
[R56] MINI Cooper S & JCW Hardtop 2007-up
[R57] MINI Cooper S & JCW Convertible 2009-up

See also other documents in the category NM Engineering For the car: