Neuspeed 65.10.76 User Manual
Page 3
NEUSPEED
• 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX
Visit us on the web…http://www.neuspeed.com & http://www.apsoutlet.com
8. Pry off electrical connector bracket. This bracket
is located against the lower, inside fender. Tuck
wiring connector to side for now.
9. Remove MAF from air box lid by removing two
(2) Phillips screws.
10. Install supplied rubber isolator into existing hole
from underneath the vehicle using supplied washer
and M6 nylon lock nut. NOTE: Use hole closest to
driver’s side fender.
11. Install intake tube onto lower isolator mount
using supplied M6 nylon lock nut (10mm). Then
install tube onto upper fender mount using supplied
washer and M6 nylon lock nut (10mm).
12. Install filter. NOTE: Re-check tightness of
filter clamp a week after installation.
- 95.10.91 (1 page)
- 66.10.91 (1 page)
- 66.10.94 (2 pages)
- 66.10.95 (1 page)
- 15.02.25.3 (2 pages)
- 25.02.19.4 (2 pages)
- 25.02.19.9 (2 pages)
- 25.02.25.3 (2 pages)
- 25.02.25.4 (1 page)
- 25.10.25.8 (2 pages)
- 25.10.27.9 (2 pages)
- 80.10.91 (2 pages)
- 25.02.28.3 (2 pages)
- 45.10.91 (2 pages)
- 15.02.25.4 (2 pages)
- HCB.25.02.25.3 (1 page)
- 32.10.91 (1 page)
- 65.10.72 (1 page)
- 49.10.93 (16 pages)
- 49.10.95 (15 pages)
- 58.45.06.028 (1 page)
- 62.02.65 (2 pages)
- 65.02.65 (2 pages)
- 65.10.79 (2 pages)
- 65.10.60 (2 pages)
- 65.10.92 (2 pages)
- 65.10.61 (3 pages)
- 65.10.99 (3 pages)
- 65.10.80 (2 pages)
- 62.10.32 (3 pages)
- 62.10.33 (3 pages)
- 62.10.71 (4 pages)
- 62.10.74 (3 pages)
- 62.10.99 (1 page)
- 62.10.83 (1 page)
- 65.10.95 (4 pages)
- 65.10.83 (2 pages)
- 65.10.85 (2 pages)
- CHIP.20T.17 (2 pages)
- 65.02.67 (3 pages)
- 62.10.92 (2 pages)
- 62.02.68 (2 pages)
- 62.10.90 (2 pages)
- 65.10.84 (2 pages)