Neuspeed 25.02.19.4 User Manual

Neuspeed For the car

19mm ADJUSTABLE REAR SWAY BAR

1996 – 2001 AUDI A4 / S4 QUATTRO

PART # 25.02.19.4

INSTALLATION INSTRUCTIONS

PART LIST:

–

SWAY

BAR

–

RIGHT

HAND

BRACE

2 – POLYURETHANE BUSHINGS

2 – M10 NYLOC NUTS

1 – LEFT HAND SUPPORT BRACKET

10 – M8 FLANGE BOLT

1 – RIGHT HAND SUPPORT BRACKET

10 – M8 NYLOC NUT

1 – LEFT HAND BRACE

–

WASHER

TOOLS REQ:

–

RATCHET

–

17mm

WRENCH

1 – 12mm SOCKET

1 – 13mm WRENCH

1 – 13mm SOCKET

Left hand (driver’s) side shown.

In order to achieve the correct fit, please follow the following sequence:

1. Raise rear of vehicle and support with jack stands under lifting points. NEVER WORK UNDER A

VEHICLE SUPPORTED ONLY WITH A JACK.

2. Remove factory sway bar: Spray WD40 (or equivalent) on ball joint stud at sway bar end links. Use 17mm

wrench to remove end link lock nut.

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

Visit us on the web…http://www.neuspeed.com & http://www.apsoutlet.com

Table of contents