Neuspeed 62.10.32 - Manual

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX
Visit us on the web…http://www.neuspeed.com
POWER PULLEY KIT
2004 VOLKSWAGEN R32 3.2L 24Valve - VR6
PART # 62.10.32
INSTALLATION INSTRUCTIONS
PART LIST:
1 – CRANKSHAFT PULLEY 1 – PWR. STRG. PUMP PULLEY
1 – CRANKSHAFT PULLEY BOLT
TOOLS REQ: 1 – Ratchet 1 – Standard Screw Driver
1 – 27 mm Socket 1 – Die grinder and rotary file.
1 – 17 mm Socket 1 – Hammer
1 – 24 mm Wrench (open end) 1 – Chisel
1 – 6 mm Hex Socket 1 – T10069 Counter Holder
NOTE: FACTORY TOOLS REQUIRED AND PROFESSIONAL INSTALLATION.
1. Car hoist required, vehicle not high enough from
ground with a jack or jack stands. Loosen lug
nuts (17mm hex) on right front wheel. Remove
right front wheel.
2. Remove under-panel and lower right engine
cover.
3. Using a 6 mm hex socket, loosen bolts securing
power steering pump pulley but do not remove at
this time.
4 Using a large standard screwdriver, remove
passenger side engine cover.