MF Digital SCRIBE SA 3000 - Manual (Page 61)

Scribe SA Standalone Series Operator’s Guide Document Revision: 05/31/06
Page 61
Setting The Internal Clock
The Scribe SA Standalone’s internal clock is set at the factory for Eastern
Standard Time (observing daylight savings when applicable).
To set the internal clock, the steps are as follows:
• Press the “7” key on the keypad. The screen will now read:
Press the “Stop/No” and you will be prompted to set the “System
Time.”
• Press the “Start/Yes” key if you would like to set the system time.
The screen will then read:
• Press the “Start/Yes” key after each entry.