beautypg.com

Page 11 – MF Digital SCRIBE SA 3000 User Manual

Page 11

background image

Scribe SA Standalone Series Operator’s Guide

Document Revision: 05/31/06

Page 11

• Make sure you power on the unit using the primary power switch

located on the back of the Scribe SA Standalone. You must also power
on the drive bay. That switch is located at the front of the drive bay
itself.




• Once the proper voltage setting has been confirmed, it is time to turn on

the unit. Wait a minute or two while the system starts up. The screen
will now read: