MF Digital SCRIBE SA 3000 - Manual (Page 15)

Scribe SA Standalone Series Operator’s Guide Document Revision: 05/31/06
Page 15
• This displays the Multiple Images status of the Scribe SA
Standalone. Multiple images allows the user to store up to 6 separate
master images on the internal Hard Drive.
• This displays the Installed Memory of the Scribe SA Standalone.
• This displays the number of good and bad copies that were produced
to date on the system
• Press the “2” key on the keypad. You will see several functions
scroll across the screen. Select a function by pressing the
corresponding number on the keypad. Enable or disable the function
by pressing the “Start/Yes” or “Stop/No” key.
• 0- The factory setting for this function is disabled. When enabled,
the Verify After feature automatically compares discs to the master
disc or hard disk image after copying is completed. Due to the nature
of the various compact disc formats, only CD-ROM Mode 1, CD-