MF Digital SCRIBE SA 3000 - Manual (Page 39)

Scribe SA Standalone Series Operator’s Guide Document Revision: 05/31/06
Page 39
Copying From A Hard Disk Image
Warning: If you have not already created a hard disk image, do so
now, as described in the previous section.
After a hard disk image has been created, it can be used as the copying
master source.
Multiple Images Disabled
To make copies from a hard disk image that was previously created with
the Multiple Images feature “disabled” (i.e. from a single hard disk image),
the steps are as follows:
• From the main operating screen depicted below:
• Load as many blank discs as are required into the CD / DVD recorders.
• Press the “COPY” key on the keypad. The screen will now read:
• Press the “Start/Yes” key to begin copying from the hard disk image, to
the blank discs in the recorders. Depending on the format type of the
image, something similar to the following will be displayed on the
screen: